The tiles on the wall are damaged. After cleaning is applying a primer coat with stucco cleaner. The primer coat creates an adhesive between the new stucco and the surfaces. The stucco builder applies the basecoat, the main layer for the final appearance of stucco. It is comprised of sand as well as water that are combined with cement. The application is done with a trowel. When the basecoat is dry and smooth, it can be smoothed using a roller. It is then applied to that base coat. This is accomplished by mixing sand, cement, and water. For smoothing the topcoat using a roller. Once the topcoat has been installed,…

Ld concrete floors look as good and fresh. You can start by watching the video on Resurfacing Concrete Floors with a Self-Leveling Skim Coat. The video offers guidelines and suggestions on the best way to do it. There is no need to be changed. An easy resurfacing procedure can give it the appearance as brand new. These are the steps to follow; * Wash the Concrete Make sure you clean it out prior to beginning Resurfacing. A power washer would work most effectively. * Repair: Cracks and holes are commonplace in flooring made of concrete that is old. Every crevice should be filled. It is important to smooth them out…